Typical Properties:

High adhesive strength, excellent performance, environmental protection, safety, and no corrosion.

Shelf Life:

The product is valid for 9 months (from the date of production). Used for installation, fixing, sealing and insulation of solar photovoltaic power generation components.

Typical Application:

Dedicated for solar module junction box sealing.

Parametes:

0perating Process:

1.Mixing: Weigh components A and B according to a mass ratio of 6:1. And put them into a clean container and mix them evenly.

2.Potting: Complete the potting of the sealant within the operating time, otherwise the leveling properties will be affected.The substrate should be kept clean and dry before potting.

3.Stirring: Pay attention to stirring in the same direction, otherwise too many bubbles will be mixed in the sealant. The container should also be stirred evenly, otherwise the rear part may not solidify.

4.Curing: It can be cured at room temperature or at high temperature. Curing speed is greatly affected by curing temperature and humidity.

Notes:

1. Please use the product as soon as possible after opening it.

2. Store it in a sealed container at room temperature and avoid light and heat. 

3. It can be stored for 9 months at room temperature.